A comperative study of cyclic fatique resistance of two rotary systems files in artificial canals

---

Original Article

Author Details : Emre Ovsay*

Volume : 5, Issue : 1, Year : 2020

Article Page : 4-5

https://doi.org/10.18231/j.ijce.2020.002

Suggest article by email

Get Permission

---

Abstract

To aim of this study is to evaluate the cyclic fatique resistance of two different Ni-Ti rotary files Protaper Next and Fantadental V-Taper Gold at angle of 60 degrees in a metal block. This study was done with 7 files in each group including Protaper Next #25(Group 1) and Fantadental V-Taper Gold files#25(Group 2). The files were tested in artificial 60⁰ curved canal on computer (CNC) machined metal block at a constant body temperature at 36.5 degrees. Each file rotated in a 360 motion with 350 rpm speed and 2.5 Ncm torque (Xsmart plus, Dentsply) until files were fractured. The time elapsed during rotation were recorded and the length of fractured part of the instruments measured for each file. Mann-Whitney U test was used to compare two independent groups. Kruskal-Wallis test was conducted to compare time and length among groups. The time periods and the length of the fractured parts of the instruments in each group: Group1 Protaper Next #25 10:05±0,76 sec (n=7); Group2 Fanta V-Taper Gold#25: 24:02±0:36 sec /(n=7).There was significant difference observed between cyclic fatigue of Group1 Protaper Next Files#25 and Group2 Fanta V-Taper Gold Files#25. No significant differences between groups were apparent regarding length of the fractured part.

Keywords: Cyclic Fatique, Protaper Next,V-Taper Gold.

How to cite : Ovsay E , A comperative study of cyclic fatique resistance of two rotary systems files in artificial canals. IP Indian J Conserv Endod 2020;5(1):4-5

This is an Open Access (OA) journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.